T7Suite

[lfteixeira]

Sorry to repeat the question but:

BTW, my car don't register nothing in the AFR feedback maps, should it work in mine? (9-3 B205E MY02)

What is missing me

[Dilemma]

You'll have to be measuring with a wideband lambda sensor which puts values in DisplProt.LambdaScanner

[Dajazzz]

You'll have to be measuring with a wideband lambda sensor which puts values in DisplProt.LambdaScanner

and this should be connected to pin #16 on the ECU and enable the checkbox in the T7suite settings for wideband use.


New version 1.9.1 is working fine with graph, thx.

[Dilemma]

You're welcome!

[lfteixeira]

You'll have to be measuring with a wideband lambda sensor which puts values in DisplProt.LambdaScanner

Can the AFR map with the stock narrowband lambda?
I know it's unreliable, but at least it give a clue if the AFR is rich or lean.

Thanks.

[voodorush]

It doesnt make any sense - the most important data will be unavailable.
You dont need the AFR feedback when the car is in closed loop - the system will adjust to lambda 1 (afr 14,7) anyway.
The most important data you need is when the car is in open loop - durring WOT when you need something arround (or below) AFR 11-12.
Unfortunately when car enters open loop all the input from narrow band lambda sensor is unavailable because T7 stops to use lambda control in open loop and starts calculating injector timing by fixed matrix (the VE-map - all parts which are above values specified by LambdaCal.MaxLoadNormTab) so all data from narrow band sensors is unavailable.

Cheers,
Stoyan

[Dajazzz]

Dilemma,

would it be possible to show the selected area in the table, also as highlighted in the graph?
I remember from T5suite, if i drag some cells to mark them, the same area becomes yellow in the graph under it.
It was always quite nice to select dips and peaks....

[Bubbaman]

Master G..... ,
Just noted that the common help in T7Suite - Documentation doesn't work anymore...
Both items are "dead". For a specific reason, or a little hickup?

Keep it up, getting better by the week...

R.

[Dilemma]

I guess there's something with your PDF reader not right.
Mine works fine (not on the dev-machine, just an ordinary win7 computer), both the manual and the "bible".

Tried restarting the computer yet?

[Dilemma]

Did a restart fix it?

[SaabNoob]

I've just tried this and it's the same for me too even after a restart. If i click to view 'T7 doumentation', CPU usage goes to 100% on Acrobat.exe process and stays there until i end the process with CTRL/Alt/Del.


BTW regarding the non-functional 'close' button problem when viewing maps, in T5Suite it works on both my PCs but doesn't in T7Suite.

[Dilemma]

Does the same thing happen when you double click the pdf file in the explorer?

[G-ice]

Hi Master G,

is is possible that your suites try to update the USB drivers for the USB/BDM?
The USB/BDM divers regularly get "lost" and need to be sorted out again to use the USB/BDM app.

Kind regards,

little G

[Dilemma]

Yes, that might happen.
There are two files copied to the system folder: canusbdrv.dll and ftd2xx.dll
Maybe i should not deploy these by default?

[johnc]

is is possible that your suites try to update the USB drivers for the USB/BDM?

I've heard Windows Update does that...

[G-ice]

I don't do windows updates, just becouse i want to keep things working...
That laptop isn't connected to the www (all that much) either, to keep it free of junk.

[Bubbaman]

G, please, please please don't laugh too hard...... (you too, iceman!)
Didn't install AR in my virtual PC
How deep can one fall before one sees the light?

So:

[Dilemma]

Glad it wasn't some mysterious bug chasing me

[SaabNoob]

Does the same thing happen when you double click the pdf file in the explorer?

Double-clicking the file in 'Dilemma' folder opens it immediately no problem.

[Dilemma]

Strange.
Since you have more issues that i can't seem to reproduce: what OS, service pack etc are you running?
x86 or x64?